Construction Vehicle Terminal

業界の課題

Construction vehicles operate in environments with high vibration, dust, moisture, and direct sunlight. Operators need clear displays for equipment status, safety monitoring, and task management. Standard displays are not suitable for continuous use on excavators, loaders, cranes, and other construction machinery.

Why VD120 and VD100 for Construction

The VD120 (12.1-inch, IP67) is the preferred choice for larger machines requiring dual CAN and higher protection. The VD100 (10.1-inch, IP65) is a strong alternative for most construction equipment. Both support navigation, equipment monitoring, diagnostics, and multi-camera display under vibration, dust, and outdoor conditions.

Recommended Models for Construction

For construction vehicles, RUGSTORM recommends the VD120 and VD100 vehicle terminals.
The VD120 (12.1-inch, IP67) is the preferred choice for larger machines requiring dual CAN and higher protection.
The VD100 (10.1-inch, IP65) is a strong alternative for most construction equipment.
Both support navigation, equipment monitoring, diagnostics, and multi-camera display under vibration, dust, and outdoor conditions.

モデル	サイズ	Protection	Suitability for Construction	主な特徴
VD120	12.1 インチ	IP67	Best fit for larger machines	Dual CAN, Android 14, 6 TOPS NPU, 750 nits
VD100	10.1インチ	IP65	Strong alternative	CAN, GNSS, 4x AHD camera inputs, Android 10
VD70	7インチ	IP65	Suitable for compact equipment	Smaller form factor, GNSS, Android 10

Typical Construction Applications

Excavator, loader, and crane equipment monitoring
Dispatch and task management
Multi-camera safety display (rear, side, blind spot)
Vehicle diagnostics and status display
GNSS-based location and navigation

Key Advantages

High-brightness sunlight-readable displays
IP65 / IP67 protection against dust and water
CAN bus and GNSS integration
Multiple camera input support
Glove-friendly and wet-touch operation
Wide operating temperature and vibration resistance

FAQ

Use Cases

Excavator Operator Interface

An excavation contractor needed a reliable terminal on their excavator for machine control and GPS tracking.
They installed a 10.1-inch Android vehicle terminal with wide temperature range and IP65 front.
The terminal allowed operators to control functions, view GPS position, and receive machine data directly in the cab. It reduced downtime caused by equipment failures.

Wheel Loader Control and Monitoring

A construction company used 12.1-inch Android vehicle terminals on wheel loaders for real-time load tracking and operator guidance.
The high-brightness screen and glove-friendly touch worked well even with gloves on. The terminal connected to the loader’s control system and sent data back to the company server for progress tracking.

Bulldozer and Heavy Machinery Dashboard

A large civil engineering firm wanted a rugged terminal for bulldozers that could display dig depth, fuel level, and machine status.
A 10.1-inch Windows vehicle terminal was selected because their existing software ran on Windows.
The sealed design withstood the harsh site conditions, and the wide voltage support allowed stable operation from the vehicle battery.

お問い合わせ